TUTTOBICITECH.IT, 08.2021

EFFETTO MARIPOSA. CAFFELATEX TUBELESS TAPE, IL NASTRO PER LA CONVERSIONE TUBELESS
di Giorgio Perugini | 17/08/2021 | 08:00

Avete un paio di cerchi che vorreste rendere tubeless? Non ci sono problemi con il nastro per la conversione tubeless di Effetto Mariposa. La conversione è pratica e sicura, poi basta completare l’operazione con una valvola Caffélatex Tubelss Valve e il sigillante Végétalex per avere un set di ruote performante e sicuro al 100%.

Un cerchio tubeless in pochi minuti

Il nastro per la conversione di Effetto Mariposa è il sostituto naturale del nastro para-nipples e rende tutti i cerchi a tenuta d’aria sigillando con assoluta precisione tutti i fori dei raggi. Non serve grande manualità e in breve riuscite a seguire il profilo interno del cerchio stendendo il nastro adesivo su tutto il canale.

Non un semplice nastro, ha una marcia in più

Il nastro Caffélatex Tubeless Tape viene realizzato con il poliestere ed è molto resistente nei confronti della pressione, inoltre è nettamente più leggero rispetto al comune Pvc. Quest’ultimo dettaglio non è cosa da poco, infatti, con il nastro di Effetto Mariposa è possibile realizzare un set completo decisamente leggero visto che il quantitativo per siglare un cerchio da 29“ pesa solo 5,5g. La parte adesiva non aderisce immediatamente al canale, ma lo fa in maniera idonea con il passare del tempo e mediante l’azione della pressione senza patire cambiamenti di temperatura.

Curate i particolari

I consigli di Effetto Mariposa vi ricordano che basta un giro di nastro per un cerchio da mtb o gravel ( pressione massima di gonfiaggio 4 bar ) e due per un cerchio da strada ( pressione massima 8 bar ), inoltre, va sempre creata una sovrapposizione nella zona di applicazione della valvola. Infine, partite sempre da un cerchio bello pulito, è essenziale affinché il collante agisca. Nel montaggio ho utilizzato le favolose valvole Caffélatex Tubeless Valve e il sigillante Végétalex.

www.effettomariposa.eu

Il nastro Tubeless di Caffélatex è disponibile in sei larghezze:

- S (20,5 mm): per cerchi con larghezza interna compresa tra 16 e 20 mm;

- M (25 mm): per cerchi con larghezza interna compresa tra 20 e 25 mm;

- L (29 mm): per cerchi con larghezza interna compresa tra 25 e 29 mm.

- Plus S (34 mm): per cerchi con larghezza interna compresa tra 29 e 34 mm;

- Plus M (40 mm): per cerchi con larghezza interna compresa tra 34 e 40 mm;

- Plus L (45 mm): per cerchi con larghezza interna compresa tra 40 e 45 mm.

English Translation

MARIPOSA EFFECT. CAFFELATEX TUBELESS TAPE, THE TAPE FOR TUBELESS CONVERSION
by Giorgio Perugini | 17/08/2021 | 08:00

Do you have a pair of rims that you would like to make tubeless? There are no problems with Effetto Mariposa's tubeless conversion tape. The conversion is practical and safe, then just complete the operation with a Caffélatex Tubelss Valve and Végétalex sealant to have a 100% safe and performing wheelset.

A tubeless rim in minutes

The Effetto Mariposa conversion tape is the natural replacement for the nipple tape and makes all the rims airtight by sealing all the spoke holes with absolute precision. You do not need great dexterity and in a short time you can follow the internal profile of the rim by spreading the adhesive tape over the entire channel.

Not just a tape, it has an edge

Caffélatex Tubeless Tape is made with polyester and is very resistant to pressure, and is also much lighter than common PVC. This last detail is not a trivial matter, in fact, with the Effetto Mariposa tape it is possible to create a very light complete set given that the quantity to mark a 29 "rim weighs only 5.5g. The adhesive part does not adhere immediately to the channel, but does so in a suitable manner over time and through the action of pressure without suffering changes in temperature.

Take care of the details

The advice of Effetto Mariposa reminds you that one lap of the tape is enough for a mtb or gravel rim (maximum inflation pressure 4 bar) and two for a road rim (maximum pressure 8 bar). area of ​​application of the valve. Finally, always start from a nice clean circle, it is essential for the glue to act. In the assembly I used the fabulous Caffélatex Tubeless Valve and the Végétalex sealant.

www.effettomariposa.eu

Caffélatex Tubeless tape is available in six widths:

- S (20.5 mm): for rims with internal width between 16 and 20 mm;

- M (25 mm): for rims with internal width between 20 and 25 mm;

- L (29 mm): for rims with internal width between 25 and 29 mm.

- Plus S (34 mm): for rims with internal width between 29 and 34 mm;

- Plus M (40 mm): for rims with internal width between 34 and 40 mm;

- Plus L (45 mm): for rims with internal width between 40 and 45 mm.

 

LINK TO REVIEW